PIPE FITTING--BRASS FITTING
Advantages
All pipe fitting threads are made to Dryseal standards.* Connectors,unions, nuts and extruded elbows and tees are machined from CA360 and CA 345 brass; forged elbows and tees are machined from CA377 brass.
Specifications
Meets functional requirements of the SAE J530 and SAE J531.
Applications
Use with brass, copper or iron pipe. Manufactured for low and medium
pressure line connection work.
Working Pressure and Temperature Ranges
From -65° to +250°F. at 1000 psi.
Vibration
Fair resistance to vibration and pipe movement depending
upon conditions.
Pipe thread assembly guide (turns method)
for Dryseal threads with pre-applied Vibra Seal
Straight Fittings
1. Tighten external thread into the internal thread.
2. Tighten an additional 2 revolutions with a wrench up
to 12 in. male pipe thread. Above 12 in., 112 to 212
revolutions
Elbow or Tee Fittings
1. Tighten external thread into the internal thread.
2. Tighten an additional 1 to 112 revolutions with
a wrench.
3. Tighten fitting, Clockwise, to Align with Tubing
(never counter clockwise).
Note: To minimize the possibility of a leaking
threaded joint after assembling male to female pipe
threads, neither end should be backed out
(loosened) once the assembly has been made
){kind=link}
){kind=link}